Jump to content

bike For Sale: 2007 Honda CBR 600RR + Many extras

Recommended Posts

For sale: 2007 Honda CBR 600RR
Mileage: 8172miles
Condition: Excellent
Price: $6500 obo

This is a red/black/silver CBR 600RR, in excellent shape, with 8172 miles on the odometer.
I am the first owner (purchased new in 2007), and have taken very good care of it. All oil changes done with Repsol full synthetic oil, regular brake fluid flushes, radiator was flushed and filled with Engine Ice coolant.
Its a brilliant bike, but selling as I havent had much time to ride it for some time.
Tires are brand new (~15-20 miles) Pirelli Diablo superbike pro. Also includes a set of used Bridgestone BT-003RS tires (used/worn but still a lot of tread in the center for street use.)

Comes with many extras:
Yoshimura carbon fiber full race exhaust
BMC drop-in air filter + hand modified air intake (remove baffles and obstructions)
Bazzaz fuel tuner + Dyno tuning (full custom mapping)
Ohlins TTX rear shock, Ohlins pistons and springs in fork
Sato Racing rear sets (Original foot pegs also included)
Sato Racing tie-down hooks (replaces passenger footpegs. original passenger footpegs also included)
Puig double-bubble windscreen
Woodcraft frame sliders and clutch/stator cover protectors
Spiegler braided steel brake lines (front and rear)
Pazzo racing short brake/clutch levers (original levers also included)
Flush mount front turn signals, and 2010+ rear OEM signals (with smoke lenses from 1000RR)
Includes both passenger seat and solo cowl/cover
Stomp grip knee grip pads (one set installed, but left side fell off. also includes a complete unopened new set)
OEM Honda factory service manual
Joe Rocket CBR mesh jacket (red/black, size large)

All original OEM parts (except original exhaust) are included for any mods, and several extra parts/screws/oil plug washers and other odds and ends.

If you have any questions, please let me know.
Thanks for looking!






  • Upvote 1

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Helmutt
      2006 KTM 625SMC & 2009 Kawasaki KLX250SF. 
      NO TRADES.
      Prefer to sell as a pair, but will seperate. 
      $6500 firm for both bikes.
      Local pickup only
      Can either PM me, or message me at 9Three7-Four17-78eleven
      2006 KTM 625SMC. 
      Clean title in hand.  11,232 miles.  Runs amazing!  Meticulously maintained.  Bought 3 years ago with 10k miles on it, so I've ridden it less than 400mi/year.  Oil and filters changed with new air filter every season.
      Bike is currently safety wired with catch cans installed to pass tech for OMRL ( OhioMiniRoadracingLeague ).  Raced some supermoto rounds with OMRL ( all cart track asphalt, no dirt sections ), but I'm a slow guy so it was never beat on or crashed.
      The only blemishes are some scuffs across the rear fender from my leathers getting on/off the bike, and a battery leak last year stripped a little of the finish ( pictured ) from the swingarm ( since replaced with a proper AGM battery ).   Other than that, in excellent condition for an '06.
      I did not cut any wiring or plastics when I race prepped it, so it's a simple plug-n-play to put back to street legal form and comes with all lamps ( and then some ) to do so. 
      Mods done by the PO are...
      *KTM Hardparts racing front rotor
      *Gutted stock exhaust system
      *JD jet kit
      *LED rear turn signal mod ( tail tidy )
      *690SMC OEM Handguards
      Mods I've done...
      *R&G axle sliders front and rear
      *Muffler sliders
      *SXC front number plate
      Bike has a fresh 160/60-17 ContiAttackSM rear tire mounted, a 120/70-17 Dunlop Q2 front with some life still in it, but also comes with a brand new 120/70-17 ContiAttackSM front tire.
      Includes quite a few spares...
      *OEM SMC headlamp
      *OEM SXC headlamp
      *690SMC headlamp ( modded to fit this bike )
      *OEM KTM stock front rotor
      *Spare new sets of EBC HH sintered brakepads ( not pictured )
      *RaceTech rear shock spring ( currently installed - 250lb rider )
      *OEM KTM rear shock spring ( not pictured )
      *Spare OEM KTM nylon fork spacers
      *Spare water pump rebuild kit
      *Rear passenger pegs w/brackets
      *OEM KTM kickstand ( not pictured )
      *Spare KTM OEM coil ( not pictured )
      *Original KTM Owners briefcase kit with manuals ( not pictured )
      **Bike stand and wheel chock pictured are NOT included with sale**
      $4750 OBO if sold seperately from the KLX
      2009 Kawasaki KLX250SF
      Clean title in hand.  5717 miles.  Runs great.  Wife has hardly ridden it since buying 3 years ago, less than 400mi/year.  Oil and filter change every year, no matter the mileage. A few scuffs on the right side from a slow tip over, but overall in really good condition.
      I lowered the bike 2" and shaved the seat, so this will easily fit short riders @ 5ft tall.   Bike also comes with a Seat Concepts gel gripper seat.
      Mods are...
      *FMF Powercore slip on ( done by PO )
      *LED tail lamp, integrated ( done by PO )
      *Devol rear lowering links
      *Shaved stock seat
      *New chain/sprockets 2017
      *New Pirelli Diablo Corsa2 tires 2017
      *MSR low bend handlebars
      $2750 OBO if sold seperately from the KTM

    • By GSXR Rider #63
      2005 GSXR 600 (everything you need for $8000)
      Fresh Engine (3115 miles on used engine for 2017 season)
      5 track days on engine (9 hours run time)
      Valve adjustment, new plugs, balance throttle bodies 2018
      Carrozzeria wheels (2018)
      Spare sprocket carrier for quick change trackside (45T & 46T Vortex rear sprockets)
      520 chain conversion
      GMD Computrack front end (AK20s, 20mm custom valving and needles)
      .90 springs and Race Tech oil
      New lower fork tubes, bushings, seals and full rebuild by Ohlins 2018
      Penske rear shock (refreshed 2017)
      425Lb spring and Race Tech oil
      GiPro Gear Indicator with sun shield
      Power Commander V (2018)
      Power shifter with GP shift pattern
      Vortex front stay for race bodywork (headlight eliminator)
      Woodcraft case guards with skid plates
      Woodcraft Two-piece frame sliders
      Barnet clutch
      Ballistic EVO battery and charger with easy access pigtail
      Cox Racing radiator guard
      STVA repair (lifetime guarantee Charles Crabtree) 2016
      Braking Systems directional front rotors
      Custom lightweight rear subframe
      Custom laser cut lightweight rear brake rotor
      GoPro mounts front and rear
      Full Yoshimura exhaust
      Yoshimura race ECU
      GPR steering stabilizer (refreshed 2016)
      Drilled Titanium brake caliper and front axle pinch bolts
      Keyless ignition switch on left clipon
      Vortex gas cap with locking tab
      Stomp grip panels on gas tank and rear swingarm
      CFMotorsports rear sets
      GPX Pro lap timer with fork mount bracket
      Wired for 12v, Gear position and RPM through bike harness
      Chicken Hawk Pole Position tire warmers
      Rebuilt 2016 by Chicken Hawk Racing
      Pit Bull front and rear stands
      Pit Bull trailer brace
      Suzuki OEM factory service manual
      4-gallon gas can
      Spares kit
      Front and rear Michelin Power RS tires (new), Braking Systems rear rotor, 2 x rear sets, 2 x Woodcraft frame sliders, OEM ECU, oil filters & drain plug washers, NGK Iridium plugs (new), power shifter sensor, SBS Dual Carbon front pads (new), Suzuki throttle body test harness, Suzuki Factor mode switch (mounted under seat for quick diagnostics), clip on handlebar tubes, front fender, upper body cowling, fuel pump (used)
      Haul Master Foldable 4x8 trailer with 12” wheels (Model 90154)
      Spare tire with mount
      Diamond decking floor with stainless low-profile button cap bolts
      Tool-less quick release removeable side panel kit (Haul Master Model 47423)
      Custom clevis pins and DZUS fasteners
      Solid aluminum loading ramp (U.S. General Model 94057)
      Custom under-frame brackets to stow loading ramp while transporting (with clevis pins)
      Same pins secure ramp to trailer while loading/unloading
      Reinforced wheel wells
      Spare lighting kit
      Bit Bull trailer brace plate with clamps
      1 7/8” ball mount

    • By mike884
      Hi all. My Africa twin is up for sale. If anyone is at all interested I'm pretty motivated.  Pic has all bike details. Thanks!

    • By Cmpfreak88
      Putting this up here for a friend, he's relocating next week and this bike needs a good home!
    • By silentcropduster
      Mint, 3,2xx miles, clean title in hand, no trades. Bike is in near show room condition and was just recently detailed w full ceramic coating. Chain recently cleaned/adjusted, tire pressure checked, etc.

      Bike is bone stock except the following mods/new parts:

      Progrip super bike grips,
      Quick throttle tube,
      Stebel Nautilus horn (wired the right way)
      Front LED turn signals.
      New rear tire (had nail in old 1)

      VIN is in pix

      YouTube video walk around of bike: