For sale: 2007 Honda CBR 600RR
Price: $6500 obo
This is a red/black/silver CBR 600RR, in excellent shape, with 8172 miles on the odometer.
I am the first owner (purchased new in 2007), and have taken very good care of it. All oil changes done with Repsol full synthetic oil, regular brake fluid flushes, radiator was flushed and filled with Engine Ice coolant.
Its a brilliant bike, but selling as I havent had much time to ride it for some time.
Tires are brand new (~15-20 miles) Pirelli Diablo superbike pro. Also includes a set of used Bridgestone BT-003RS tires (used/worn but still a lot of tread in the center for street use.)
Comes with many extras:
Yoshimura carbon fiber full race exhaust
BMC drop-in air filter + hand modified air intake (remove baffles and obstructions)
Bazzaz fuel tuner + Dyno tuning (full custom mapping)
Ohlins TTX rear shock, Ohlins pistons and springs in fork
Sato Racing rear sets (Original foot pegs also included)
Sato Racing tie-down hooks (replaces passenger footpegs. original passenger footpegs also included)
Puig double-bubble windscreen
Woodcraft frame sliders and clutch/stator cover protectors
Spiegler braided steel brake lines (front and rear)
Pazzo racing short brake/clutch levers (original levers also included)
Flush mount front turn signals, and 2010+ rear OEM signals (with smoke lenses from 1000RR)
Includes both passenger seat and solo cowl/cover
Stomp grip knee grip pads (one set installed, but left side fell off. also includes a complete unopened new set)
OEM Honda factory service manual
Joe Rocket CBR mesh jacket (red/black, size large)
All original OEM parts (except original exhaust) are included for any mods, and several extra parts/screws/oil plug washers and other odds and ends.
If you have any questions, please let me know.
Thanks for looking!
2006 KTM 625SMC & 2009 Kawasaki KLX250SF.
Prefer to sell as a pair, but will seperate.
$6500 firm for both bikes.
Local pickup only
Can either PM me, or message me at 9Three7-Four17-78eleven
2006 KTM 625SMC.
Clean title in hand. 11,232 miles. Runs amazing! Meticulously maintained. Bought 3 years ago with 10k miles on it, so I've ridden it less than 400mi/year. Oil and filters changed with new air filter every season.
Bike is currently safety wired with catch cans installed to pass tech for OMRL ( OhioMiniRoadracingLeague ). Raced some supermoto rounds with OMRL ( all cart track asphalt, no dirt sections ), but I'm a slow guy so it was never beat on or crashed.
The only blemishes are some scuffs across the rear fender from my leathers getting on/off the bike, and a battery leak last year stripped a little of the finish ( pictured ) from the swingarm ( since replaced with a proper AGM battery ). Other than that, in excellent condition for an '06.
I did not cut any wiring or plastics when I race prepped it, so it's a simple plug-n-play to put back to street legal form and comes with all lamps ( and then some ) to do so.
Mods done by the PO are...
*KTM Hardparts racing front rotor
*Gutted stock exhaust system
*JD jet kit
*LED rear turn signal mod ( tail tidy )
*690SMC OEM Handguards
Mods I've done...
*R&G axle sliders front and rear
*SXC front number plate
Bike has a fresh 160/60-17 ContiAttackSM rear tire mounted, a 120/70-17 Dunlop Q2 front with some life still in it, but also comes with a brand new 120/70-17 ContiAttackSM front tire.
Includes quite a few spares...
*OEM SMC headlamp
*OEM SXC headlamp
*690SMC headlamp ( modded to fit this bike )
*OEM KTM stock front rotor
*Spare new sets of EBC HH sintered brakepads ( not pictured )
*RaceTech rear shock spring ( currently installed - 250lb rider )
*OEM KTM rear shock spring ( not pictured )
*Spare OEM KTM nylon fork spacers
*Spare water pump rebuild kit
*Rear passenger pegs w/brackets
*OEM KTM kickstand ( not pictured )
*Spare KTM OEM coil ( not pictured )
*Original KTM Owners briefcase kit with manuals ( not pictured )
**Bike stand and wheel chock pictured are NOT included with sale**
$4750 OBO if sold seperately from the KLX
2009 Kawasaki KLX250SF
Clean title in hand. 5717 miles. Runs great. Wife has hardly ridden it since buying 3 years ago, less than 400mi/year. Oil and filter change every year, no matter the mileage. A few scuffs on the right side from a slow tip over, but overall in really good condition.
I lowered the bike 2" and shaved the seat, so this will easily fit short riders @ 5ft tall. Bike also comes with a Seat Concepts gel gripper seat.
*FMF Powercore slip on ( done by PO )
*LED tail lamp, integrated ( done by PO )
*Devol rear lowering links
*Shaved stock seat
*New chain/sprockets 2017
*New Pirelli Diablo Corsa2 tires 2017
*MSR low bend handlebars
$2750 OBO if sold seperately from the KTM
By GSXR Rider #63
2005 GSXR 600 (everything you need for $8000)
Fresh Engine (3115 miles on used engine for 2017 season)
5 track days on engine (9 hours run time)
Valve adjustment, new plugs, balance throttle bodies 2018
Carrozzeria wheels (2018)
Spare sprocket carrier for quick change trackside (45T & 46T Vortex rear sprockets)
520 chain conversion
GMD Computrack front end (AK20s, 20mm custom valving and needles)
.90 springs and Race Tech oil
New lower fork tubes, bushings, seals and full rebuild by Ohlins 2018
Penske rear shock (refreshed 2017)
425Lb spring and Race Tech oil
GiPro Gear Indicator with sun shield
Power Commander V (2018)
Power shifter with GP shift pattern
Vortex front stay for race bodywork (headlight eliminator)
Woodcraft case guards with skid plates
Woodcraft Two-piece frame sliders
Ballistic EVO battery and charger with easy access pigtail
Cox Racing radiator guard
STVA repair (lifetime guarantee Charles Crabtree) 2016
Braking Systems directional front rotors
Custom lightweight rear subframe
Custom laser cut lightweight rear brake rotor
GoPro mounts front and rear
Full Yoshimura exhaust
Yoshimura race ECU
GPR steering stabilizer (refreshed 2016)
Drilled Titanium brake caliper and front axle pinch bolts
Keyless ignition switch on left clipon
Vortex gas cap with locking tab
Stomp grip panels on gas tank and rear swingarm
CFMotorsports rear sets
GPX Pro lap timer with fork mount bracket
Wired for 12v, Gear position and RPM through bike harness
Chicken Hawk Pole Position tire warmers
Rebuilt 2016 by Chicken Hawk Racing
Pit Bull front and rear stands
Pit Bull trailer brace
Suzuki OEM factory service manual
4-gallon gas can
Front and rear Michelin Power RS tires (new), Braking Systems rear rotor, 2 x rear sets, 2 x Woodcraft frame sliders, OEM ECU, oil filters & drain plug washers, NGK Iridium plugs (new), power shifter sensor, SBS Dual Carbon front pads (new), Suzuki throttle body test harness, Suzuki Factor mode switch (mounted under seat for quick diagnostics), clip on handlebar tubes, front fender, upper body cowling, fuel pump (used)
Haul Master Foldable 4x8 trailer with 12” wheels (Model 90154)
Spare tire with mount
Diamond decking floor with stainless low-profile button cap bolts
Tool-less quick release removeable side panel kit (Haul Master Model 47423)
Custom clevis pins and DZUS fasteners
Solid aluminum loading ramp (U.S. General Model 94057)
Custom under-frame brackets to stow loading ramp while transporting (with clevis pins)
Same pins secure ramp to trailer while loading/unloading
Reinforced wheel wells
Spare lighting kit
Bit Bull trailer brace plate with clamps
1 7/8” ball mount