Up for sale is a 2007 Suzuki SV650 that was bought from Brian "Tuna" Mullins awhile ago that is well known with WERA and AFJ, ,so he can testify to the background to this bike. I purchased it originally to build for an endurance bike with some friends but never had time to do it or finish it. This is a BILL OF SALE ONLY - TRACK ONLY, this bike is NOT street legal as it does not have a title as it originally come from an police auction
975 total miles
pit bull 520 chain and sprocket kit,
pit bull spools,
Galfer front SS brake lines, new EBC front and rear pads,
GSXR steering stabilizer,
new fork oil,
pit bull speedo spacer replacement,
new dunlop Q2's,
SV Parts black rear sets (Not installed but come with it),
new ecu and new gsxr fuel pump
new battery (always keep on trickle charger)
What needs to be done:
Tank needs to be treated, and I have provided a new KBS Cycle tank sealer kit
stock bodywork reinstalled or buy race bodywork
All stock bodywork and lights come with it, and I also had a set of old gen 1 R6 bodywork you can have it you want to retrofit. Pictures are of when the bodywork was still on the bike, it has been off and stored properly so you can chose if you want street bodywork or race bodywork on it when you set it up.
CASH ONLY, NO TRADES, Bike is located in Columbus, OH
Bike has just been sitting, I don't have time to finish building it or get to the track, so figured it is best to get it to someone that can put it to use.
Thanks for the consideration, and hope it can go to good use for someone!
By GSXR Rider #63
2005 GSXR 600 (everything you need for $8000)
Fresh Engine (3115 miles on used engine for 2017 season)
5 track days on engine (9 hours run time)
Valve adjustment, new plugs, balance throttle bodies 2018
Carrozzeria wheels (2018)
Spare sprocket carrier for quick change trackside (45T & 46T Vortex rear sprockets)
520 chain conversion
GMD Computrack front end (AK20s, 20mm custom valving and needles)
.90 springs and Race Tech oil
New lower fork tubes, bushings, seals and full rebuild by Ohlins 2018
Penske rear shock (refreshed 2017)
425Lb spring and Race Tech oil
GiPro Gear Indicator with sun shield
Power Commander V (2018)
Power shifter with GP shift pattern
Vortex front stay for race bodywork (headlight eliminator)
Woodcraft case guards with skid plates
Woodcraft Two-piece frame sliders
Ballistic EVO battery and charger with easy access pigtail
Cox Racing radiator guard
STVA repair (lifetime guarantee Charles Crabtree) 2016
Braking Systems directional front rotors
Custom lightweight rear subframe
Custom laser cut lightweight rear brake rotor
GoPro mounts front and rear
Full Yoshimura exhaust
Yoshimura race ECU
GPR steering stabilizer (refreshed 2016)
Drilled Titanium brake caliper and front axle pinch bolts
Keyless ignition switch on left clipon
Vortex gas cap with locking tab
Stomp grip panels on gas tank and rear swingarm
CFMotorsports rear sets
GPX Pro lap timer with fork mount bracket
Wired for 12v, Gear position and RPM through bike harness
Chicken Hawk Pole Position tire warmers
Rebuilt 2016 by Chicken Hawk Racing
Pit Bull front and rear stands
Pit Bull trailer brace
Suzuki OEM factory service manual
4-gallon gas can
Front and rear Michelin Power RS tires (new), Braking Systems rear rotor, 2 x rear sets, 2 x Woodcraft frame sliders, OEM ECU, oil filters & drain plug washers, NGK Iridium plugs (new), power shifter sensor, SBS Dual Carbon front pads (new), Suzuki throttle body test harness, Suzuki Factor mode switch (mounted under seat for quick diagnostics), clip on handlebar tubes, front fender, upper body cowling, fuel pump (used)
Haul Master Foldable 4x8 trailer with 12” wheels (Model 90154)
Spare tire with mount
Diamond decking floor with stainless low-profile button cap bolts
Tool-less quick release removeable side panel kit (Haul Master Model 47423)
Custom clevis pins and DZUS fasteners
Solid aluminum loading ramp (U.S. General Model 94057)
Custom under-frame brackets to stow loading ramp while transporting (with clevis pins)
Same pins secure ramp to trailer while loading/unloading
Reinforced wheel wells
Spare lighting kit
Bit Bull trailer brace plate with clamps
1 7/8” ball mount
The Shoei RF-1200 is the perfect helmet for commuters and track day riders alike. Now the Valkyrie graphic in Red/Black is on sale at Riders Discount! Down to size XL only on this.
MSRP $589.99 - Now On Sale For $379.99!
This helmet has an adjustable, three-position lower vent that is easy to use with riding gloves. Three upper air vents and four upper exhaust vents work together to allow cool air in and hot air out.
Included with this helmet is a CWR-1 shield equipped with Pinlock EVO fog-resistant system. The shield has innovative new ribs on the edges to help eliminate bending. The QR-E Base Plate System on this helmet not only makes changing shields easy, but also blocks out unwanted water and wind when closed.
The RF-1200's 6-layer AIM+ shell construction and dual-layer EPS work together to redirect impact energy in the case of a crash. An Emergency Quick Release System (E.Q.R.S.) is built into the helmet to allow medical personnel to safely remove the cheek pads and helmet from an injured rider’s head.
3D Max-Dry II Interior “absorbs and dissipates sweat twice as fast as tradition nylon.” The interior is completely removable, washable, replaceable and adjustable. Removable ear pads allow you the option to use a communication system with the RF-1200.
If you have any questions about this product or would like to place an order, feel free to give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM and we'll get back to you right away!