Jump to content
TwiztedRabbit

Rabbit's 2017 TOR Yamaha R6 race build

Recommended Posts

My major concern with this build is the rider wont show the bikes true potential ;)     So what are you waiting on for updates?  I know there was a lot accomplished in last few days.

  • Haha 1
  • Confused 1

Share this post


Link to post
Share on other sites

Buwahaha,  though possibly accurate... Blake is just jelly it isn't his bike... 

 

But correct we did get a lot done this last weekend

Share this post


Link to post
Share on other sites
19 hours ago, wolfeman28 said:

REM polishing is so under-rated. There really is no downside to it as when it's done correctly, your parts come back at the same size they were sent (unlike classic polishing that will shave everything down a bit). It's dirt cheap too. Last time I sent in a transmission everything got done for $60. I think they just take the small stuff and throw it in along with other customers big parts.

100% correct.  Small things like this plus a revised shifter pivot location along side a properly modified slipper clutch and Translogic quick shifter and auto blip will make a bike like this run through the gearbox like a dream.  It really is incredible the difference it all makes.

 

Share this post


Link to post
Share on other sites
13 minutes ago, The Blake Face said:

Jelly?  I've seen your lap times, lets reserve that for a time its actually called for.   

Damn going for the jugular already, I thought we were boys

Share this post


Link to post
Share on other sites
Just now, TwiztedRabbit said:

Damn going for the jugular already, I thought we were boys

that actually means you are one of the boys.  with friends like these....

Share this post


Link to post
Share on other sites
2 hours ago, TimTheAzn said:

How long have you two been dating?

you jelly timmy?  could have just told me your concerns :p

but we don't date... it's an open relationship 

Share this post


Link to post
Share on other sites

This weekend was a busy one, spent the time working on not 1, but 3 2017 Yamaha R6. Mostly getting the bike peeped for many of the hard parts.

From suspension carts and install, safety wire, harness and line routing. The details matter in making the bike perform well and crash better.  Every thing we do before hand is to speed up maintenance and repair. Seconds matter in between races be it changing a tire , fork or shock springs. Making adjustments.  Or repairing damage.

20180209_151055.jpg

20180209_152332.jpg

20180209_211711.jpg

20180209_220438.jpg

20180209_231444.jpg

20180209_231434.jpg

20180210_160750.jpg

20180210_160812.jpg

  • Upvote 2

Share this post


Link to post
Share on other sites

Shocked you didnt mention your freshly powder coated rims!  The short list of installed items include clip ons, rear sets, grips, toe gaurds, sprocket, Ohlins steering damper, ABS  electrical block off, ignition switch by pass, braided front and rear lines, and a few other odds and ends.  In addition, the wire harnesses for the Translogic quick shift/auto blip systems were prepped for install when motor is ready.  

Share this post


Link to post
Share on other sites

Guys if ya didn't figure it out,  hah.  Blake is a Turn One Racing employee. He is a major apart of this build. And generally can answer most of the technical questions quicker amd mpre accurately than I can. 

  • Like 1

Share this post


Link to post
Share on other sites

But oh yes my freshly coated wheels. In a color I am designating volcano red. in the Sun it's hot red and orange, and in normal light it's deep rich red. much like a volcanoes "magma"

 

1321989198744442544.jpg

  • Like 1

Share this post


Link to post
Share on other sites
On ‎2‎/‎14‎/‎2018 at 5:25 AM, TwiztedRabbit said:

Guys if ya didn't figure it out,  hah.  Blake is a Turn One Racing employee. He is a major apart of this build. And generally can answer most of the technical questions quicker amd mpre accurately than I can. 

You forgot handsome

Share this post


Link to post
Share on other sites

Armour Bodies fairings finally arrived.  We will be getting these to Ohio riders own Paul Finn, so he can work his magic. 

Resized_20180217_154536_7449.jpg

Resized_20180217_153935_3650.jpg

Resized_20180217_154218_4338.jpg

Resized_20180217_154032_5019.jpg

  • Upvote 1

Share this post


Link to post
Share on other sites

so this has sadly been put on the back burner for a bit while the race season has really crept up on us... we will be  sorting through the  100's of pics and  getting info together buuuut....

 Paul of 614PaintWorx kills it again

Flake for days !!!!!

 

20180413_174318.jpg

20180413_174408.jpg

20180413_174413.jpg

20180413_174518.jpg

  • Like 1
  • Beer 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By RidersDiscount
      Spring into savings with over 50% off select Arai Corsair-X helmets at Riders Discount! These won't last long so get them while you can!
      Call MIKE at 866.931.6644 ext. 804 or send us a private message through this forum to get yours for this exclusive forum price. Is email more convenient? Write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!
      Graphics On Sale:
      Red Curve
      Large (2 left)
       

      Arai Corsair-X Curve Helmet in Red - MSRP $979.95 - Forum Price $485 shipped in the lower 48

      Vinales
      X-Small (6 left)
      Medium
      Large
      X-Large
      Arai Corsair-X Maverick Vinales Helmet - MSRP $979.95 - Forum Price $485 shipped in the lower 48

      Dani
      Medium
      Large
      X-Large
      Arai Corsair-X Dani Pedrosa Helmet - MSRP $979.95 - Forum Price $485 shipped in the lower 48
      About the Arai Corsair-X:
      The PB-SNC² shell of the Corsair-X is made from synthetic fibers and a special resin formula, resulting in a lightweight and durable helmet.
      This helmet's interior features Eco-Pure material, which helps maintain a neutral pH level close to the skin.
      5mm peel away cheek pads allow you to customize the fit of the Corsair-X.
      The IC Duct-5 air intake and Type 12 diffusers work together to allow maximum ventilation.
      A clear Pinlock insert is included with this helmet.
      The Arai Corsair-X is both Snell 2015 and DOT certified.
    • By RidersDiscount
      WINTER SALE 2017
      Quantities, sizes, and colors are limited so don't wait long!
      Suits, helmets, and combo packs!  Check them all out below and give MIKE a call at 866.931.6644 ext. 804 or send him a message to place an order! Is email more convenient? Feel free to write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!
      All pricing includes free shipping in the lower 48 states. 

        
      If you buy an RST CPX suit and one of the Bell Race Star Carbon helmets below at the same time we will save you an additional $25!


      2016 RST CPX-C Leather Suit -  MSRP $887.99  SALE $419
      Available in the following:
      Blue 40/50 (1 left)
      Flo Red SOLD OUT
      White 40/50 (2 left), 42/52, 44/54
      Flo Green SOLD OUT


      Bell Race Star Carbon Helmet  -  MSRP $749.99  SALE $349 with FREE dark smoke shield!
      Triton Black/Silver

      X-Small (5 left)
      X-Large



      Bell Race Star Carbon Helmet   -  MSRP $749.99  SALE $349 with FREE dark smoke shield!
      Triton Blue/Yellow

      X-Small (7 left)
      Small (5 left)
      X-Large
      2X-Large (6 left)



      Bell Race Star Carbon Helmet   - MSRP $749.99  SALE $349 with FREE dark smoke shield!
      Triton Red

      X-Small (2 left)
      Small



      Bell Race Star Carbon Helmet   - MSRP $749.99  SALE $349 with FREE dark smoke shield!
      Tracer Gloss White

      SOLD OUT



      Bell Race Star Carbon Helmet   -  MSRP $749.99  SALE $349 with FREE dark smoke shield!
      RSD Chief

      X-Small (2 left)


      RST Mens Tractech Evo Race Leather Gloves  
      MSRP: $139.99  SALE: $75.00 LIMITED SIZES/COLORS LEFT
      Black
      XXL (4 pairs left)
      Fluorescent Green (yellow)
      SOLD OUT
      Red
      XXL (2 pairs left)
      White
      SOLD OUT

       
       
    • By Xsr900Rider
      I have a like new 2016 Yamaha xsr900 I’m looking to sell. It has just over 3,000 miles(mileage may go up as I ride it). I am throwing in all my riding gear and stuff for the bike.  I’m not able to get out and ride enough to justify the payment so it is time to let it go.
       
      Riding Gear
      size 46 black Joe Rocket jacket leather and textile
      2 pair leather riding gloves
      size 47 Sidi riding boots
      scorpion Hemet and scena headset 
       
      Bike accessories 
      moto demic fly screen
      r&g radiator gaurd
      r&g block off plate for rear pegs
      still have stock rear pegs
      rear tailbag
      rear stand
       
       
      I will work on getting pictures of everything and need to make sure I know my payoff before posting the asking price. I just wanted to get it on here for anyone interested.

    • By RidersDiscount
      Made from a combination of Lorica, D-Stone fabric, and crust leather, the Dainese R Axial Pro In Boots are both protective and comfortable. The inside features Dainese's D-Axial system in carbon and DuPont Kevlar fiber to reduce the risk of twisting of the ankle and provide greater impact protection.
      Left - Black/Black | Right - Black/White

      The sole of the boot is made out of lightweight rubber to provide excellent grip.
      These boots contain replaceable stainless steel toe sliders and protective polymer heel plate sliders. Gear shifter guards provide additional protection.

      The R Axial Pro In Boots are a part of Dainese's suit to boot fastening system, which helps to prevent from catching on foreign objects.

      Inside of the boot is a tightening strap to help avoid fracture.
      The R Axial Pro has elasticated inserts on the top of the boot for flexibility. The boot is equipped with a speed lacing system and YKK zipper for a safe and precise fit.

      These boots include a setscrew wrench.
      The Dainese R Axial Pro In Boots are CE - CAT. II - EN 13634 Standard certified.
      MSRP $519.95

      You can order your Dainese R Axial Pro In Boots by calling MIKE at 866.931.6644 ext. 804. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!
    • By RidersDiscount
      Brand new for Spring 2018, the Alpinestars Limited Edition Schwantz Supertech R Boots were designed to celebrate the 25th anniversary of Kevin Schwantz's World Championship title. These are extremely limited and we only have less then a hand full of each size.

      Made of microfiber and synthetic leather, the Supertech R is both light and durable. A new front flex area made up of thermoplastic polyurethane (TPU) and mesh provides a more breathable and comfortable fit. This new construction is more abrasion resistant than the original version.

      The sole of the boot is made out of lightweight rubber that is flexible for when the rider changes positions. Additionally, the boot contains a replaceable, co-injected TPU/aluminum toe slider for added toe protection. The protective polymer heel plate slider is also replaceable.

      The Supertech R has accordion microfiber stretch in both the Achilles and the top of the boot, making it easy to put on and take off. The boot is equipped with both a TPU zipper and a Velcro tab to ensure the boot stays closed during use. It also features a micro-adjustable ratchet top closure for a safe and precise fit.

      A completely removable inner ankle brace provides protection to the side and back of the foot. 3D mesh material wicks moisture, keeping feet cool and dry.

      These boots are CE certified to EN 13634:2010 standards.
      MSRP $499.95

      If you have any questions about this product or would like to place an order, feel free to give MIKE a call at 866.931.6644 ext. 804. Is email more convenient? Send us a private message through this forum or write to us at FORUM at RIDERSDISCOUNT dot COM and we'll get back to you right away!
×