Jump to content

redkow97

Members
  • Posts

    9,671
  • Joined

  • Last visited

  • Days Won

    29

Everything posted by redkow97

  1. Where are you located? I always need more gloves...
  2. Biden explicitly endorsed shotguns. So in a worst-case scenario, we still get to have cheap fun 🤷🏻‍♂️
  3. Other great news - i taught my fiancé to drive stick in like 1999... she hasn’t driven a manual since then, but somehow remains very proficient. #soulmate
  4. I forgot the best part though - whoever first owned this Xrs really put some money into it. it has a nice cold air intake, short throw shifter, and a fuel management module connected to the air intake so that it still idles properly when you mess with the throttle response settings. I don’t know how much power it actually adds, but it was completely un-detectable during the test drive, and feels like it’s been professionally tuned. even the LED under-body lights are wired up well, and the switches are installed discretely. It’s ridiculous, but totally hidden, until i get drunk and start having the car do “party tricks” in the driveway. i used the mods to negotiate the sale price down. The car has sat on 3?lots for a total of almost 5 YEARS. I flat-out told the sales mgr, “you bought this at auction because it’s a really clean corolla with 68,000 miles on it. I’m betting you got it for $5500, but didn’t realize it was a manual transmission. The car fax says it’s sat here since May, after being on two other lots for a long time. This is a $7500 car. That’s a fair price, and leaves you enough meat on the bone to pocket something, but we both know that The market for a 5-speed corolla is very limited.” technically the sale price was $8100, but they gave me $900 for the 2003 corolla, which had over 236,000 miles on it.
  5. Stumbled upon this thread. I’ve landed on my feet pretty well. Upgraded houses - or rather, school districts. Moved in with GF. Got engaged. Bought China grom, bought SV650 race bike, bought corolla XRS manual, and am a lot happier, in spite of Covid BS. The Lexus was a casualty of the house upgrade, but i couldn’t pass it up for the deal I got, and honestly, the kids would have destroyed the interior. loving the XRS too. It’s not fast or fancy, but it’s markedly better than my old car in every way (not that that was a high bar). Even so, i got everything i said i wanted: 40 more horsepower, power windows, cruise control, a manual transmission, and a nicer stereo - that runs on 87 octane. it’s entertaining, and the SV is in the garage to be truly fast ...at least compared to cars.
  6. The fast guys are in the 1:05’s now. anyone under 1:08 can complain about the surface. 😘
  7. I’m a fucking moron, but so are the people who assemble these bikes. The crank case breather was routed in an asinine manner, causing it to kink. the resulting pressure was pushing out the o-ring on the clutch side that seals the part that depresses he clutch springs. so i was leaking oil from a cover not meant to have oil behind it. Rerouting the breather tube and re-seating the o-ring solved the issue completely. It’s still shockingly slow (49 on GPS), but not broken in yet, and i have a larger front sprocket, and will put a better carb and an exhaust on it. Chinese parts are $30 for the carb and $50 for the exhaust, hahahahaha
  8. After 21.6 somewhat eventful miles, my Chinese Grom clone is leaking oil from The right side engine vase cover. the engine is so generic that it has a screw-on cover where it can be branded differently. The gasket behind mine seems to be failing, and leaks oil when the bike is warm. i am concerned that i will round out the screws if i try any harder to remove the cover to inspect it. Laying the bike against a milk crate in the garage sure is easier with a 125 though. anyway, i can’t ever see myself accessing this cover for maintenance. Any reason i shouldn’t just JB weld the entire seem? Maybe try RVT first to see if that works?
  9. What about Kayla? <poke poke> 😛
  10. Let me know what they want for the property. I’m in for a few grand.
  11. $1600 with tax, to my garage. 0 miles. i have seen Z125s for $2200, but they sell quick, in shady parts of town...
  12. redkow97

    OMRL 2020

    Just don’t forget about them. No rush. I should just see if Dallas wants to buy them...
  13. Clutch feel is horrible, and there is no free play. otherwise it feels cheap and slow - but i think it will break in and feel cheap and fun 😂
  14. The “Amagrom” is in the garage. Still in the crate, but mostly assembled. Looks good. There is some sticker goop on the headlight shroud, but meh. with any luck, i will have it started later tonight.
  15. redkow97

    OMRL 2020

    I’ll grid at the back and take a DQ so as not to mess with anyone’s points, but there is no way that a grom clone will out perform a grom. I figure i can get close to stock grom performance after new tires, a better carb, and an exhaust, but the grom costs double for a reason.
  16. Mine comes today. Not Sure if i will have time to get it assembled tonight.
  17. redkow97

    OMRL 2020

    I will plan to attend, and assume a stock Boom Vader can race grom class. 😂
  18. It will be an amazing fulfillment center within the year.
  19. Anecdotally, take a look at Japan and California. masks, due to smog and viral concerns, were common in Japan well before Coronavirus. CA and Japan are roughly the same size, and have similar populations and population density. Look at their daily case figures. Even with inconsistencies in the rate of testing, there is a clear correlation that masks are effective at reducing the rate of transmission. you can still debate whether or not the fatality rate rationalizes mask mandates or not, but the masks WILL reduce transmission. I won’t miss wearing one, but it only really bothers me when i get somewhere and realize i forgot mine.
  20. Rode it crashed it. Putting it back together. Oops chinese “Amagrom” arrives tomorrow as well.
  21. the R6 master arrived 2 days early, AND, it’s a Brembo. Didn’t even see that when i bid on it. i have functioning brakes, but they’re not as firm as i would like. encountered some issues removing the wheels, since i have never messed with a Suzuki before, but they’re off, and i am hopeful that reinstallation goes a bit smoother now that i sort of have a clue about how things go together.
  22. Mine are 2003 GSXR calipers and forks. I am told they used the sam calipers on 2005(?) sv1000s so its a Frankenstein front end, which puts it into superbike classes anyway. Not worried about the R6 master. Hope it works.
  23. One of them was my friend Jeff.
×
×
  • Create New...