Jump to content

RidersDiscount

Supporting Sponsor
  • Content Count

    4,895
  • Joined

  • Last visited

  • Days Won

    15

Everything posted by RidersDiscount

  1. The Racing Line Exhaust from Akrapovic, when fitted to your Kawasaki ZX-10R will not disappoint in looks, performance or quality. The exhaust itself weighs 8.5 lbs. less than stock, while at the same time, delivering an additional 16 horsepower in terms of peak power output. The biggest – and most noticeable differences in engine power occur between 5,000 and 10,000 RPM, right where you’ll notice it most! That, the dopoff in power around 7,000 RPM is eliminated, too. Like all Akrapovic exhausts, craftsmanship is second-to-none and everything fits just as right and this particular exhaust ships with an expertly-crafted carbon fiber exhaust hanger for pukka race good looks! You know the routine, give Mike a call on 866.931.6644 to get this, or any other Akrapovic component sent straight to your door. Of course, forum@ridersdiscount.com or a PM works, too!
  2. RidersDiscount

    Bell Star MIPS DLX Tantrum Helmet

    One for a rider then. Give me your monies.
  3. RidersDiscount

    Bell Star MIPS DLX Tantrum Helmet

    As Bell was one of the first manufacturers to develop a full-face helmet for the motorcycling world, it’s only natural that same level of innovation would continue today. The Star MIPS DLX helmet employs an innovation that’s designed to mitigate brain injury in the event of a hit that’s beyond anything an EPS-lined helmet can currently achieve. MIPS (Multi-directional Impact Protection System) technology, which was invented about 20 years ago and continually refined since then, works much like that of the human skull’s own impact mitigation system. It allows the helmet to rotate slightly on your skull in the event of an impact. That is to say, the helmet itself may move up to 15mm on top of your head while staying safely in place to reduce rotational injury to the brain. It’s almost like a sliding shock absorber for your helmet. Inside your skull, your brain does the same thing to reduce injuries – it slides along the inner portion of the skull a little way in order to reduce stresses that would otherwise damage brain function. The MIPS device is fixed between the impact-absorbing liner and the X-Static comfort liner and requires no additional setup when donning the helmet – you wear it just like any other lid. There’s no additional equipment to fuss with, but the safety benefits are certainly worth it. All of this is placed inside a shell made with Bell’s Trimatrix composite which combines aramid (Kevlar), carbon fiber and fiberglass materials for safety, durability and strength. Quick-release magnetically-attached cheek pads are also included as standard. Out front, for your eyes, is a massive viewport. You won’t see much, if any, of the helmet when you put it on and pull the Provision, self-tinting visor into place. By self-tinting, we mean you won’t need to carry an additional visor with you everywhere you go. The UV-sensitive film automatically darkens in daylight and clears itself up in the dark. It’s a really nice feature! For expert sizing guidance and lightning-fast shipping, call Mike on 866.931.6644 ext. 818, send a note to forum@ridersdiscount.com with BELL STAR MIPS DLX HELMET in the subject line, or just shoot us a PM and we’ll get back to you right away.
  4. RidersDiscount

    What do YOU need?

    Hey guys! natedogg624 here I have finally assumed command of the Ohio Riders forum and will be your go to guy for sweet deals on any of our products If you like Mike or are in correspondence with him, don't worry he's still around at ext. 804 He's a Michigan fan though so... Anyways, many of you know by now that we provide detailed product reviews on select items you see posted on the forum. Now it's time for you to tell us what YOU need. We carry pretty much any parts, gear or casual apparel you can think of. Post up right here, call, or email us for anything you need: a single item or a complete shopping list. Just let Nathan know: 866.931.6644 ext 809 or FORUM at RIDERSDISCOUNT dot COM and we'll see what we can do.
  5. RidersDiscount

    What do YOU need?

    PM headed that way.
  6. RidersDiscount

    Bell Star MIPS DLX Tantrum Helmet

    Always good to have a back up, just saying.
  7. RidersDiscount

    Bell SRT Modular Helmet

    Bell’s SRT Modular helmet provides the protection and comfort of a full face helmet with the convenience of a three-quarter helmet, all-in-one. Built on a lightweight fiberglass composite shell, this particular modular helmet is a little lighter than most, as flip-up helmets go, while still being a feature-packed lid. The helmet ships with a clear lens installed, but just behind that, you’ll find a built-in flip-down sun shade that’s activated by a lever on the clutch-side of the helmet. You’ll be able to instantly adapt incoming light as while you’re on the gas. There’s also a dark visor, which is incredibly easy to swap out, included with each SRT order. Ventilation is looked after with closeable intakes on the chin and forehead. And of course, you can easily open the front quarter of the helmet by pressing the large red tab on the bottom of the chin bar. A cool blast of wind is always nice on a sunny day and communicating with fellow riders requires less yelling, too! Provisions for glasses and a communications system are built into the helmet, too. Internal padding is shaped specifically to allow room for the stalks of your glasses to comfortably fit and large ear pockets provide room for the headphones associated with modern communication systems. This helmet is ideal for the road-going riding looking for a little more in the way convenience and versatility. For expert sizing guidance and lightning-fast shipping, call Mike on 866.931.6644 ext. 818, send a note to forum@ridersdiscount.com with BELL SRT MODULAR HELMET in the subject line, or just shoot us a PM and we’ll get back to you right away.
  8. RidersDiscount

    Bell SRT Modular Helmet

    A simple slide lever drops the sun shade. Call 866-931-6644 to order today!
  9. RidersDiscount

    Bell Star MIPS DLX Tantrum Helmet

    As you can see from this picture the Bell Star MIPS helmet has plenty of exhaust points to flow air around your skull. We are processing and shipping orders. If you need something, give us a call. 866-931-6644
  10. RidersDiscount

    Bell Qualifier Helmet Matte Black

    The 4 exhaust ports move air over the skull while you ride.
  11. RidersDiscount

    Bell Qualifier Helmet Matte Black

    A solid matte black helmet that’s ventilated, comfortable and safe – the Bell Qualifier is the budget-savvy rider’s go-to helmet. Each helmet is build using a proven polycarbonate/ABS plastic shell with integrated, rider-adjustable vents on the chin, forehead and scalp. These intakes are complimented on the aft top and sides to draw air through the helmet and out the rear while you’re on the throttle. Inside, a fully-removable liner (something often found only on pricier helmets) is fitted as standard. There’s even a provision for your preferred rider communication system with room for speakers in the ears and a mic up front. A tool-less, quick-release visor system is fitted as standard, so you can quickly swap between sunny and shady in less than a minute. And of course, we can also tidy you up with a smoked visor, all in one package. For expert sizing guidance and lightning-fast shipping, call Mike on 866.931.6644 ext. 818, send a note to forum@ridersdiscount.com with BELL QUALIFIER INTEGRITY in the subject line, or just shoot us a PM and we’ll get back to you right away.
  12. RidersDiscount

    Mini prepping. (Covid-19 thread)

    I hate buying toilet paper and paper towels all the time so always have at least a few months supply in stock at all times. Turns out that worked well for me in these times , even payed it forward.
  13. RidersDiscount

    I have MS

    Sorry to hear about this as well. Hang in there and reach out if there is anything I can do to help. Glad you have decent insurance as well, that will help for sure.
  14. RidersDiscount

    Attack Performance GP Triple Clamps

    Arguably one of the most cost-effective handling upgrades you can make to your machine, suspension aside – is a set of triple clamps … and the best triple clamps you can buy come from Attack Performance. Designed and manufactured in-house at Attack Performance’s headquarters in Huntington Beach, California, GP Triple Clamps can be found on some of the fastest motorcycles racing the USA, today. Each set is built using top-quality aluminum that is CNC-machined in a way to provide lightness, strength and targeted flexibility so as to substantially increase front end feel without making the bike nervous or otherwise ill-handling. It’s all held together using top-shelf hardware which makes for a sound installation, too. And for the consummate tuner, additional inserts are available which allow you to adjust offset with ease. Available for a wide range of bikes, you know the routine, give Mike a call on 866.931.6644 to get this, or any other Attack Performance component sent straight to your door. Of course, forum@ridersdiscount.com or a PM works, too!
  15. RidersDiscount

    Attack Performance GP Triple Clamps

    Agreed!
  16. RidersDiscount

    Shoei RF-1200 Variable TC-5 Helmet

    A premium full-face motorcycle helmet, Shoei’s RF-1200 combines a myriad of features specifically aimed at the road-going and trackday rider. It’s lighter, more compact (to the eye at least), better ventilated and yet, more protective than all other RF series helmets to come before. Its evolutionary design is worth your attention, especially if your current helmet is a little long in the tooth. Ventilation is addressed with a wind-tunnel shell; four intakes and four exhaust vents draw air through the helmet and straight to the scalp. Enhancing exhaust flow is an integrated wing on the back of the helmet that creates a low-pressure area right behind the helmet, but in a way that doesn’t cause buffeting or whistling. The result is a passively enhanced cooling action that you’ll be happy with on hot days. The RF-1200’s shell uses Shoei’s AIM+ six-layer design that’s of a proprietary configuration. The material is hand-laid by skilled Japanese craftsmen before being molded into shape. Four different shell sizes are used to accommodate the entire size range. This is done to insure that these DOT and Snell-approved helmets are as safe and light as possible. The safety aspect of each helmet is aided by two separate, multi-density EPS liners that fit between the comfort liner and the outer shell. The foam itself absorbs energy in the event of an impact but also, aids in ventilation with carefully engineered ports that allow air to pass through to the rider and back out of the exhausts. That brings us to the 3D Max-Dry interior liner. This fully-removable and washable liner works with all of the ventilation channels to keep you comfy. When correctly sized (TJ is an expert at this!), the helmet fits just-right snug. And with that, keeping the helmet properly positioned on your head, sees to it that maximum safety is achieved. With the RF-1200, you get a light, safe and comfortable helmet suitable for a wide range of riding conditions. Each helmet ships with extras: a lower chin curtain, Pinlock Evo visor cover, breath guard and helmet bag. All workmanship is backed by a 5 year manufacturer warranty. For expert sizing guidance and lightning-fast shipping, call Mike on 866.931.6644 ext. 818, send a note to forum@ridersdiscount.com, or just shoot us a PM and we’ll get back to you right away.
  17. This nifty little part will make cruising through heavy traffic significantly easier on your clutch hand. Upon installation of AIM’s Light Force clutch slave cylinder, you’ll notice a 40% decrease in clutch lever effort on your hydraulic-clutch equipped Harley-Davidson. In addition to that, clutch feel will change, too – you’ll notice initial bite is closer to the handlebar, and also, a wider friction zone. So, in addition to easing the work required to pull the clutch lever, you’ll find it easier to modulate it too! All you have to do is install this behind the factory transmission end cover, bleed it and you’re all set. Installation is easy with no permanent modifications required! These parts are not yet available on website. To order yours, call 866.797.2113 and speak with Mike on ext. 818. You can also PM us here, or send an email to forum@ridersdiscount.com (be sure to tell us what you’re riding!) and we’ll get back to you in no time.
  18. RidersDiscount

    Scorpion EXO-R2000 Hypersonic Helmet

    Built with input from some of the fastest riders on earth, the EXO-R2000 helmet from Scorpion comes to you at a bargain price for any rider that’s looking for a new lid. A TCT composite shell, which is made in four sizes to accommodate the entire range of heads out there, houses a dual-density EPS impact-absorbing liner and a KwikWick II comfort liner. The latter can easily be removed for cleaning without the need for special tools. Mild detergent (we prefer shampoo), is all it takes to freshin’ it up in no time. The inner elements compliment the outside of the helmet too, with six intake ports on the front that work with ten exhaust ports on the back of the lid to keep you cool as you ride along. You’ll feel the air flowing over your head when you open the front-facing intakes that are easily manipulated with a gloved hand. SNELL and DOT-certified, each helmet ships with Pinlock-ready faceshields in clear and dark smoke, along with an anti-fog inserts, helmet bag and instruction manual. Backed by a 5 year manufacturer warranty and available in a range of sizes, be sure to get the correct one to fit you by calling Mike on 866.931.6644. You can also send a note to forum@ridersdiscount.com with SCORPION EXO-R2000 HELMET in the subject line, or just shoot us a PM and we’ll get back to you right away.
  19. The finest tire warmers you can buy, made in America and ready for the world, if you’re looking for the best, Professional Line tire warms from Chickenhawk Racing are where it’s at! Many of us here at Riders Discount towers have been users, and sometimes abusers – of Chickenhawk tire warmers for decades because they work, they’re consistent and when you do muck them up, either through negligence or accident, the Redhook New York-based company’s customer service has been outstanding. You’ll find these tire warms wrapped around the wheels of some of the fastest riders thanks to their ease-of-use, simple, rugged design and superior heat output. Each Professional Line warmer uses a full-coverage heating element that provides a uniform distribution of heat across the entire carcass. The result is more even tire wear, faster heating (and retention thereof) and lower lap times. The distinctive chrome aluminized Kevlar exterior lining of each warmer sits opposite a Nomex-insulating lining that is as durable as it is good looking. Common racetrack matter, dirt and grime, are shrugged off by the rugged materials for years, and we mean YEARS – of reliable, use. Setting tire temperature is as simple as the push of on the DTC3 controller. A small display allows you to adjust final tire temp anywhere up to 225 degree Fahrenheit. Yes, you could theoretically boil water with these things. Once temp is set, the warmers will automatically get your tires up to the indicated temperature and stay there without any input on your part. Just plug it in, set it, and walk away. With your tires perfectly up to temperature before you head out on track, you can expect knee-down confidence from the first turn on. That, and significantly improved tire life, not to mention less money spent on bodywork and other parts due to cold tire crashes! To order yours, call Mike on 866.931.6644 ext. 818, send a PM here, or email forum@ridersdiscount.com with CHICKENHAWK PROFESSIONAL TIRE WARMERS in the subject line, and be sur to let us know what bike you’re riding so we can get you sized up correctly, and we’ll get back to you right away!
  20. RidersDiscount

    Mini prepping. (Covid-19 thread)

    Around these parts same thing, even beef and chicken is hard to find at the moment. I am just trying to have enough food for a few weeks in stock. I found that my local butcher was a good source for meat compared to the supermarkets and such. I prefer that anyways, you pay more but good a better product. Stay safe out there friends!
  21. RidersDiscount

    Shorai Motorcycle Batteries

    While better technology exists, motorcycles of all kinds are going down the road needlessly carrying a heavy slab of lead. For just about every bike on the market, a better option exists in the form of a Shorai Battery. There’s no lead here, but rather, a well-engineered lithium iron phosphate power cell that provides more starting power, less self-discharge and a longer life than the lead-acid battery it replaces. Each Shorai battery chassis is designed to be as small and as light as possible. And, while the chassis may look the almost the same as a conventional motorcycle battery, you’ll notice right away when picking it up that you’re holding something special. Depending on the machine, you can expect to save anywhere from 6-20lbs. off your bike’s weight. Power output aside, in terms of weight savings to value, there’s nothing else you can replace on your bike that saves so much weight at such a reasonable price. For bikes with high-compression pistons or other modifications that make turning over the engine more demanding on the starter, the battery is ready for the challenge. Each battery is rated to operate at a higher voltage output than the stock unit it replaces. This makes a Shorai battery an excellent choice for performance engine builds. And when riding season is over, the battery’s low self-discharge rate means you can pull it out of your bike, put it inside and not have to worry about it becoming flat when springtime rolls around. Just install when it’s warm and go! Shorai batteries require no special modifications to your bike’s stock charging system. Even the electrical poles are the same arrangement as the stock battery you’re replacing making installation a snap. And, because the power elements are fitted inside as small a chassis a possible, easily-cut foam blocks are included with each battery to provide a simple, quick installation in your bike’s OEM battery box. You can also use the additional space for fitting various tuning components, such as a Power Commander V, in that newly-available space. Backed by a five year manufacturer warranty, you can buy with confidence. To get your own model-specific Shorai battery, give TJ a call on 866.931.6644 ext 817, send a note to forum@ridersdiscount.com with SHORAI BATTERY in the subject line along with the model and year of the bike you’re riding, or just shoot us a PM and we’ll get right back to you.
  22. RidersDiscount

    Shorai Motorcycle Batteries

    Shorai offers a balance charger which delivers energy to each cell within the battery in a way that provides maximum power output and preserve battery life. If you are looking to cut down on the physical size of the battery Shorai will be able to do that in most cases as well. Call 866-931-6644 to order your battery today!
  23. RidersDiscount

    Mini prepping. (Covid-19 thread)

    I'm still here as well, might change down the road.
  24. RidersDiscount

    What do YOU need?

    PM on the way.
  25. OEM shock linkages are built to handle both, solo and two-up riding. While that’s good for street riders that like to ride two-up often, the mostly solo rider is losing out on rear end feel. If you’re a trackday rider, then this will certainly provide improved rear end feel, increased confidence and lower lap times at the race track. Available for the 2011-2015 ZX10 as well as the 2006-2012 and 2013+ Triumph 675/675R. Stock shock linkages are built with a progressive rate design which makes it harder to move the swingarm over larger bumps. Or, if you’re a particularly fast rider, the compromise in feel will be noticeable, especially once you swap out linkages with this Attack Linkage kit. Everything you need to improve rear end feel is in the box, all-aluminum construction with built-in, high-quality bearings is standard. All you need to do is swap out the stock components, re-use the OEM hardware and hit the road for improved suspension performance. To order yours, call Mike on 866.931.6644 extension 818. You can also PM us here, email forum@ridersdiscount.com with ATTACK LINEAR LINK in the subject line, and the exact model and year of your machine, and we’ll get you tidied up with this simple, but very effective kit.
×