Jump to content

RidersDiscount

Supporting Sponsor
  • Posts

    4,998
  • Joined

  • Last visited

  • Days Won

    13

Everything posted by RidersDiscount

  1. Woodcraft Dual Temp Tire Warmers have several unique features that were developed with the racer and trackday rider in mind. They’re designed to work on as little as 1,000W per pair and provide an even heat distribution thanks to tightly aligned coils that provide consistent thermal coverage. This coverage is aided by side curtains sewn into the warmer elements which help increase each warmer’s efficiency and aids in warming up the rims. In this way, tires can soak heat from the rims as you line up on the grid, providing a little more grip when the green flag drops. Reliable Velcro straps secure the warmers to the wheels and each unit is clearly labeled either front or rear, so there’s no confusion when getting them on your bike. The benefits of using tire warmers are many, from reducing the risk of crashes on the first few laps out on the track to increased tire life – both of which result in less money coming out of your pocket. If you’re serious about your time at the track, consider investing in Woodcraft Dual Temp Tire Warmers. Woodcraft motorcycle tire warmers are not available on our website. For more information, call Mike at 866.931.6644 ext 804 or send an email to FORUM at RIDERSDISCOUNT dot COM with WOODCRAFT DUAL TEMP TIRE WARMERS and we’ll get back to you right away. MSRP $379.99 All Woodcraft tire warmers come with clear instructions that explain exactly how to use and care for them. Woodcraft Dual Temp Tire Warmers come with this convenient duffel bag to keep them stored safely when they’re not in use. Heat intensity is selectable between 130°-140° F (warm) to 170°-180° F (hot) settings. An indicator light is located where the power cord makes its way into the warmer element. It will shine red as the tires are coming up to temperature and green when they’re ready. Heating coils are tightly spaced to provide even temperatures throughout the tire carcass. This prevents hot spots from forming and increases tire life. To prevent burn through as the result of forgetting to turn off the warmers when you head out onto the track, Woodcraft tire warms have a safety plug built-in to the front and rear warmers. By virtue of completing the circuit, this must plugged in for the warmers to provide heat. In this way, damage to the tire warmers is easily avoided since they must be disconnected before removing them from your tires.
  2. Record, post, play – that’s Contour’s motto for their line of compact HD video cameras. At the top of their food chain, lies the Contour+, an all-in-one compact camera kit that delivers true 1080p HD video that can be viewed with a GPS map overlay using the free Contour Story Teller video editing software. This GPS function reads the camera’s position four times every second and includes altitude and speed – all of which can be included in your video. Best of all, it’s easy to share your work on Contour’s website, YouTube or wherever you want, for that matter. For the true video connoisseur, Contour makes it easy to adjust microphone gain, video sharpness or exposure and also select HD output aspect ratios and resolution with just a few clicks of a mouse giving you the ability to adjust the “feel” of your videos to your exacting standards. This compact HD motorsports camera can be mounted just about anywhere using sticky-back mounts (three are included in this package) so you can record the action easily from your preferred viewing angle. Using your iPhone or Android smartphone, a built-in Bluetooth communicator allows easy setup as you’re able to see what your camera is looking at before you start filming. And, there are no proprietary output jacks anywhere on the Contour+ camera, just connect to any HDMI compatible viewing device and review your work right away or watch it in real time. For those so equipped, you can even stream live video action wirelessly to a remote point using the HDMI output! For production-minded users who like to do their own video editing and want high-quality sound to go with it, a 2.5mm microphone jack is built-in to the Contour+ chassis. This is especially handy, for example, if you want to mount the camera on the outside of your vehicle but want to put the mic inside the car or inside your helmet. A water-resistant shell surrounds the video recording equipment which is designed to withstand rain and dirt, but for those looking for extreme use – a waterproof case is also available along with a myriad of other accessories like hard mounts, strap-mounts, rotating mounts, extra batteries and even a picatinny rail adaptor for the shootists out there. From diving, to street riding to skydiving – there are no limits to what you can do with a Contour+ camera system and everything you need to get started is included with every Contour+ HD camera kit. Contour+ cameras on not yet available on our website. To order yours, call Mike at 866.931.6644 x 804 or send an email to FORUM at RIDERSDISCOUNT dot COM with CONTOUR+ HD CAM in the subject line and we’ll get back to you right away. Every Contour+ kit comes with a 1080p camera, 3 mounts, a 2gb microSD memory card, USB, HDMI and microphone cables, battery and clear instructions. Contour understands that it’s not always possible to mount your camera on a surface that’s going to be perfectly parallel to the ground. To get around this, the camera itself can be rotated within its housing for a perfectly flat view on tape. Here, you can see the slot for the included battery (secured behind red tab), USB, memory card and HDMI video output. Another nice feature of the Contour video camera is the large slider button that’s on top of the chassis. Even if you can’t see the camera (eg., mounted on your helmet) this makes it very easy to know if your camera has been activated, even when wearing a gloved hand so you won’t miss recording any of the action. For advanced videographers or those that don’t want to wait to show off their video, simply plug in the included HDMI cable to see your video on the big screen. Even better, with the right accessories (like an iPhone via Bluetooth connectivity or Teradek Cube) you can see your video in real time while it’s being recorded. A brushed aluminum chassis houses all the durable camera equipment. This is all held to whatever object you choose via a hard plastic Trail system for a solid mount that won’t shake loose. Contour+ HD Video Cameras are perfect for novice videographers all the way to professional users who need a compact, high quality video camera to record even the most intense action, anywhere, anytime.
  3. Did we mention that Cortech Latigo boots are also available in a waterproof version? And, good news for those that can corner low; replaceable toe sliders are available for all Cortech Latigo Air boots!
  4. Commemorating Mick Doohan’s visit to the Isle of Man TT earlier this year, Arai has created a new rendition of the Australian’s iconic Arai Doohan Replica helmet. The design is certainly true to the previous iterations in terms of looks with a few tweaks added to give it a TT feel. Gone is the koala on the back of the lid, having been replaced by a map of the Mountain Course and there’s no more blue either. Gray and silver colors are given a bit of sparkle and a few TT logos have been thrown in for good measure. Overall, this is what a true Arai Corsair V is all about – top notch looks to go with its stellar comfort and superior ventilation. These are so new that they’re not available on our website yet. For expert sizing guidance and fast shipping, call Mike at 866.931.6644 x 804 or send a note to FORUM at RIDERSDISCOUNT dot COM with ARAI DOOHAN TT REPLICA in the subject line and we’ll get back to you right away. The Arai Corsair-V Mick Doohan IoM TT Replica helmet fitted with an optional Corsair-V Faceshield in dark smoke (sold separately). Of course, Drudi Performance was responsible for the design of this Arai Mic Doohan helmet. The three legs of the IoM TT are tastefully depicted on a few spots of the helmet’s exterior. Drudi Performance markings are also present on the chinbar and here, on the backside of the helmet. For the true collector that does not wish to use this on the road, it is possible to remove the SNELL/DOT sticker on the back of the helmet. Don’t forget to ask about getting a visor for this helmet when ordering!
  5. Recently, Spiegler added two new colors to the wide range they already had available. Now, you can also choose either pink or yellow brake line colors for your custom motorcycle brake lines!
  6. Installing the two communicators included with the Scala G4 Powerset listed above is a quick and simple task. Each kit gives you the option of either clamping the communicator bases to your helmets or, you can use the included sticky pads for helmets that don’t have any space between the cheek pad and the shell. Here, we installed a Scala Powerset on a pair of HJC RPS-10 Ben Spies Monster Replica Helmets using the clamp mechanism. As you can see, routing the wires behind the comfort liner makes for a clean installation. The noise-canceling microphone’s boom can be bent for a perfect position in front of the rider’s mouth. After about fifteen minutes of work (we were taking our time here!), the Powerset’s pre-matched pair is ready to go! For those of you with open-faced helmets, the Scala system works there too!
  7. It pays to take your time, thanks for your input.
  8. Get a Scala G4 Powerset for $289 shipped to any address in the lower 48 states! That’s $200 off retail! The Scala Rider G4 Motorcycle Headset is the latest intercom system from Cardo Communication Systems. The G4 allows up to one mile of voice-activated bike-to-bike communication between two bikes with passengers or three separate riders. The device also works with your mobile phone to receive incoming calls with either the touch of a button or by voice command. You can even receive audible instructions from your GPS system or listen to an MP3 player via Bluetooth technology too! The built-in FM tuner permits you to listen to the radio, which is especially nice on longer rides. You can expect ten hours of talk time or one week of standby on a single charge. The device fits to most helmets without permanent modification by a simple clamping mechanism. Dual low-profile speakers are Velcro-backed to stay in place within your helmet and a noise-canceling microphone boom is adjustable so you can position it exactly where you need. The narrow wires are easily hidden behind a helmet’s comfort liner and stay out of the way. Velcro pads are also included for installing the system on helmets that are less-than-suitable for the standard G4 Powerset attachment scheme. Each Scala Rider G4 Powerset comes out of the box with two communicators as a pre-matched pair, all you have to do is charge it and you’re ready to ride! You can read more about these on our website but you gotta call Mike at 866.931.6644 ext 804 to get these at this killer price! If you have any questions, please feel free to send a note to FORUM at RIDERSDISCOUNT dot COM with SCALA G4 POWERSET in the subject line and we’ll get back to you right away. Two communicators are shipped with each Powerset system! The G4 Powerset comes in a nifty box that has everything you need for a simple installation into two separate helmets. This is one half of what’s in the box: charger, USB cable, communicator, mounting pads, MP3/mobile phone jack, wipes and even a spare boom cover. A minimalist design is what’s attached to your helmet. For better performance, the microphone boom has a colored tab on it to denote which side should face your mouth. This is the heart of the G4 system. Simple buttons are easy to feel with a gloved hand. A USB connector is built-in for charging and easy firmware updates. Convenient carrying pouch protects your communication device when it’s not on your helmet. Sold as a pre-matched pair, all you have to do is install the bases on your helmets, charge the communicators and you’re ready to go!
  9. A favorite of street riders and racers alike, StompGrip tank pads make your life easier by reducing fatigue while at the same time, increasing rider confidence. This is done by employing a patent-pending elastomer material which gently grips your leathers to provide greater control of the bike with less effort. The elastomer material isn’t super abrasive or otherwise damaging to your leathers like grip tape can be. It’s designed to wear out and be replaced after grip levels decline – similar to tires, only these tank traction pads last a lot longer! Every Stomp Grip pad is specifically designed for each model and is held in place with a strong 3M adhesive that goes on easily and, should you need to have your tank painted, comes off clean. Clear and black versions are available for most bikes so if you have some special graphics you want to show off, go with the see-through clear version! StompGrip traction pads are not yet available on our website. To order yours, call Mike at 866.931.6644 x 804 or send an email to FORUM at RIDERSDISCOUNT dot COM with STOMPGRIP PADS in the subject line and be sure to include the model/year of the motorcycle you’re riding and whether you want clear or black so we can get back to you right away. StompGrip traction pads are designed to fit on the side of your bike’s fuel tank – the area where the most grip is available for hanging off. After installation, you’ll find it takes less effort to move around and hold onto your machine. Black StompGrip for BMW S1000RR. Clear Stomp Grip for BMW S 1000RR. Clear StompGrip pads for Ducati 848, 1098 and 1198. Black StompGrip pads for Honda CBR1000RR. Clear Stomp Grip pads for Honda CBR1000RR. Black StompGrip for Suzuki GSX-R1000. Black StompGrip for Suzuki GSX-R600 & GSX-R750 K8. Black Stomp Grip for 2011 GSX-R600 & GSX-R750. Clear StompGrip for the 2011 Suzuki GSXR600 / GSXR750. Daytona 675 StompGrip traction pads. Yamaha YZF-R6/S StompGrip traction pads in clear color. YZF-R6v Stomp Grip traction pads in clear.
  10. RidersDiscount.com has a killer deal for 2003-2004 Yamaha YZF-R6 owners that need a new shock! Now, you can get a brand new Öhlins YZF-R6 shock for $599 with free shipping to any address in the lower 48 states. Öhlins 46 PRXLS shocks feature separate, adjustable high and low speed compression circuits along with adjustable rebound damping which all can be changed with the twist of the appropriate knob. A remote preload adjuster is fitted as well which you can mount to your R6’s subframe. For those interesting in tweaking the Yamaha’s geometry, these shocks can be adjusted for length too! And, because many suspension tuners and racers have seen this shock before, there’s plenty of good data available for getting your bike set up correctly with this shock. We’ll send this shock anywhere in the lower 48 states for $599! We have a limited number of these shocks on hand and ready to ship. Simply call Mike at 866.931.6644 x 804 to order while supplies last! All Öhlins 46 PRXLS Shock for Yamaha YZF-R6 will be shipped with a 105nM spring. The shock’s length can be adjusted via the blue and silver nuts at its bottom. Also, the knurled black knob controls rebound damping performance. High speed and low speed compression can be adjusted here. A remote hydraulic preload adjuster comes with a bracket fitted so it can easily be attached to the R6’s subframe.
  11. You could also put in your kid's bedroom possibly?
  12. We’ve been very satisfied with the Blingstar cabinets we’ve installed in our race hauler. They’ve proven to be very durable and have withstood some particularly rough Illinois roads near Autobahn Country Club and the more routine trips over to Grattan Raceway and Gingerman Raceway. Our word of advice goes towards making sure you don’t install any of these trailer cabinet accessories in a way that would require you to re-arrange your proven packing scheme. We carefully laid out ours with this in mind. The dual helmet bins at the front of our trailer are an excellent place to store spare knee sliders, de-ionized water, boots and gloves. We also hang our leathers from the rack and keep the tie-down there for an easy reach when loading the trailer. Oil, cleaners, brake fluid and water wetter have all found a home in these cabinets. The towel rolls at the bottom, true to their design, don’t unspool themselves either. It’s nice rolling into the paddock with everything you need ready to go. Bumpy roads and heavy use haven’t dampened our enthusiasm for Blingstar trailer accessories. They’ve worked flawlessly from day one!
  13. Yep, I have said it many times before, pictures do not do it justice..
  14. Lots of you have been asking and the wait is finally over – Ben Spies Monster Replica HJC Helmets are now in stock and shipping from RidersDiscount.com! Recently introduced as HJC’s new flagship model, the RPS-10 helmet is one of the lightest full-face helmets we’ve ever handled and features a unique secure visor latch mechanism, adjustable ventilation and a fully-removable, moisture-wicking liner. It all adds up to a helmet that’s very comfortable on the road and the relatively low weight of the Snell M2010-approved shell reduces fatigue on the neck and shoulders, especially on longer rides. Swapping out RPS-10 face shields is simple too, so don’t forget to ask about what colors we have available and be ready for the road when you open the box! For more information and expert sizing guidance, call Mike at 866.931.6644 x 804 or send an email to FORUM at RIDERSDISCOUNT dot COM with HJC BEN SPIES MONSTER REPLICA in the subject line and we’ll get back to you right away. The HJC RPS-10 Ben Spies Monster Replica Helmet. Just like his original RPS-10 Limited Edition Replica helmet, only in black and with Monster Energy logos! Ben Spies’ Monster Helmet. HJC Monster Logo helmet. The RPS-10 helmet was developed with feedback from the race track by Ben Spies himself!
×
×
  • Create New...