I've been trying to figure out the wiring on the R6 and having some problems. It's an 02' R6 and I've got Clear Advantages incorporate tail lights and Proton's in the front. Bike Wiring: Green - Right turn Brown - Left turn Blue - Running Black - Ground The rear tail light is a pretty simple install.. The Brake, Running, and Ground are in one wire with a factory plug. I only had to connect the 2 turn signals. On the front, you have the option of Fade, Strobe, or Fast blink. I chose Strobe. So this is how I wired the Protons: Red to Blue (Running) Black to Black (Ground) Orange (Strobe wire) to Green (Right turn) Orange (Strobe wire) to Brown (Left turn) The problem I'm have now is that when it's all hooked up and I turn on a left or right turn signal, both Proton's blink. If I remove the running lights connection from both Protons it works normally. I just ordered an electronic flasher.. will this fix it or am I missing something?