Jump to content

seanya1604

Members
  • Posts

    38
  • Joined

  • Last visited

1 Follower

About seanya1604

  • Birthday 01/01/1975

Profile Information

  • Location
    Columbus
  • Vehicles(s)
    2006, Honda, CBR600RR

seanya1604's Achievements

Contributor

Contributor (5/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. Bogs around 1,500-3,000. Higher it is usually ok. So I get to a cool downtown spot, go to show off the sound, and then it bogs out and almost stalls and I look like tool of the month. I did check the fuse and that was as far as I got. I'll check for cross wiring. I have to check the res. It doesn't seem to leak unless it's on, so good idea with the hoses!
  2. You guys are pretty damn good. Thanks for all the advice. Not sure which side on the leak. It collects on the middle of the two side fairings. I'll take another look though tonight. Sounds like Brian is the go to on this. I have the slip on back on and the PC is just sitting in the bike unplugged. I'll have to debate going back in there again. Thanks guys!
  3. I think the map was correct. Regardless, it bogs without it. If anyone is up for some extra coin, please let me know. Thanks for all the feedback!
  4. I put an aftermarket slip-on on. I remember leaving a gas station one day and all of the sudden, the bogging started. I put the PC on much later, thinking it would fix the richness. Didn't do anything. I took off the slip on and it was still bogging. It just seems like the more I'm in there, the more I screw up. I desperately want to pay someone to do it and even watch the work if possible.
  5. I have had some issues with my bike and really need to take it to someone who knows what they are doing and aren't just going to throw parts at a problem. I am having the following problems and am doing more damage than not working on them: 1. Engine bogging in 1st/2nd gears when gets above 210 degrees or so. Dealer said to try throttle body, but I would have to get the work done and they couldn't guarantee it being fixed. 2. Turn signal not working. I put a custom signal on and now it's not working. 3. There seems to be some radiator fluid leaking when I ride. Can't determine the source. 4. I have a Power Commander that I put on, but the dealership unplugged because they said it wasn't doing anything positive. I'm debating just putting a cover on it and giving up. It has been sad to watch these problems occur and not have the skill to fix them. If anyone is skilled and has some free time this remaining winter, I'd love to chat. Please help! :confused: Sean
  6. Haven't gotten it tuned or planned on it, but I probably should once everything is in place, assuming I stop the original bogging issue. I will check it out.
  7. Thanks, don't worry about it for now. I have the instructions and they look pretty clear. All I have left is the tank and whatever I find under there. Hopefully that's it.
  8. Thanks guys! I'll update progress and reach out for any additional help. I really appreciate the feedback!
  9. Honestly though, I would be happy spending the $ to know it was being done correctly and the problem resolved.
  10. It actually arrives Thursday. I'll make sure to update the post with results! That is if it gets mapped correctly and works!
  11. "My 600rr was a local whore and was beat to shit but ran like butter". Now that's funny! ha ha ha! Yeah, it seemed like it was running fine. Then I went to the gas station (shitty marathon) and put a gallon in. It immediately started the bogging. So I took out the fuel, put sunoco in it and ran some of that fuel cleaner crap. Runs fine for the first 5 minutes, then first gear starts to bog in lower rpms. Bogs when they are high too in like 3rd/4th gears. Then she cools and runs fine again for a few minutes.
  12. Thanks Bad. I hope it's easy, but my fear is that my bogging problem won't be resolved and it could be plugs or something else that I can't troubleshoot. It's been 2 weeks without riding and if I don't get this fixed, I'm going to have to take it in and they will take it in the back, probably tighten a screw, and charge me hundreds. I just want to resolve the issue once and for all and learn from it. If all fails, your steps seem exactly right. Thanks!
  13. Ok, so I recently posted that I was having some issues with my Leo Vince SBK slip on and I ordered a Dyno Power Commander III to try to help with fuel control issues. I was told by Leo Vince that I shouldn't need one, but it is apparent that either a plug is jacked up or I have to install this. Since I am already taking things apart, I am going to check the plugs and install the Power Commander. I already have the bike apart, except for the tank. My goal is to learn to do this, but to do it correctly and to be able to ride once the job is completed. I am confident I can get the job accomplished, but I don't want to make this problem any worse. Would anyone that has done this before be willing to work with me to complete this task this weekend for $100? I don't just want to hand it off to be completed. I want to be part of finishing what I started without screwing it up any further. It is on a 2006 CBR600RR. Let me know if anyone is interested!
  14. That makes sense. No flashes. I am actually just trying to diagnos another post I made about my Leo Vince slip on I just put on. I am trying to determine if the "bogging" I'm feeling has to do with bad gas (it started after I put a gallon of Marathon 93 in to top it off) or if it is the slip on. If it's bad gas, I am thinking of looking for the fuel filter. I did the fuel cleaner stuff after I siphoned the tank and put all Sunoco 93 in. I just finished pulling off the slip on and applying a high temp silicone. I'm going to test it tonight to see if it could have been that. Long shot, but worth a try. If that doesn't work, back to looking for the fuel filter.
×
×
  • Create New...