Jump to content

ReconRat

Members
  • Content Count

    9,482
  • Joined

  • Last visited

  • Days Won

    18

Everything posted by ReconRat

  1. That will work. Some of the fluids are listed on another page. A typical 40% reduction is proper, except for very slippery fluids like graphite. https://www.engineeringtoolbox.com/torque-lubrication-effects-d_1693.html
  2. The sad part about those hex head fastener replacement kits, is that many of them were stainless steel. Which when installed, in contact with aluminum, causes the aluminum to rot away, from the dielectric potential between the two metals. I remember putting stainless hardware on an aluminum license plate, only to see huge holes appear in the aluminum, and ruining the license plate. Even with plain steel, I'd dip them in primer paint, or loctite, or something, to slow it down. That was the technique in aerospace assembly. Dip the mismatched fasteners in zinc oxide primer before installing them. Or even for same metal assembly. Saw it mostly done for rivets in aluminum structure. edit: also remember putting one of those aluminum company parking stickers on a chrome bumper, and having the sticker burn a square hole right through the chrome and steel bumper. Did not expect that... re-edit: putting fluids on fasteners will alter the torque requirements. I don't remember the details. Another something to look up.
  3. Yup, I keep reading that is the test. Fit the blade in the hardware, and it holds itself up, it's that much of a fit improvement. Throwback story... Back before people realized the difference. When people mushed up case fasteners frequently, I'd use a little metal drift and hammer the fastener kinda closed. Those old fasteners were rather soft anyway. And then hammer in an impact driver bit for a tight fit. That worked almost every time, but you have to throw the fastener away.
  4. ok, just bought these, since most impact stuff is done on #2 and #3. A set of two metal ratcheting screwdrivers from Vessel that you can hit with a hammer. Rarely got the larger impact drivers out anyway for much of anything, unless it got mushed up or stuck. https://www.amazon.com/gp/product/B07ZK6V1GQ/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1
  5. I also have a Reed #2 screwdriver, which is only used in rare situations in aviation.... And some mini sets of tiny tools, that are JIS, for working on Japanese electronics. If you've ever worked on Sony, or a Japanese camera, you have to have those.
  6. This will be confusing to discuss... From what I've seen, while looking at JIS screwdriver sets, the standards have changed once again. JIS screwdrivers might not be marked or sold any longer as JIS. The JIS (Japanese Industrial Standard) for them was discontinued, due to newer production methods that supposedly work for all fasteners that look like Phillips. But the JIS standard still applies to the production of the JIS hardware itself. Supposedly. What I think happens, is that regular Phillips still don't fit some hardware very well, some times. To add to the confusion, there is a newer standard, that might or might not be used in manufacturing. DIN 5260-PH/ISO 8763-1. All I get out of the new standard, is that it is very close to the old JIS. Adding to the confusion, motorcycle manufacturing might use the old JIS hardware, or the newer, maybe, or maybe not. What will remain true, is that if you run across a sloppy fit, which is most likely the old hardware (or perhaps even the newest standards), you will need either the JIS or the DIN 5260-PH/ISO 8763-1 screwdriver. Especially if you own an older bike, like before 1980 or certainly 1970. Here's a bit of a forum article that compares the Phillips vs. JIS vs. DIN 5260-PH/ISO 8763-1 And this, from WebBikeWorld on the subject, where the comments are worth reading. Although they were completely confused by the situation as well. And I think Hosan JIS screwdriver sets are junk. I suspect the current Vessel sets will work for just about everything. The Vessel sets are no longer advertised as being JIS. I have older JIS screwdrivers, and a JIS T-handle bit set that the bits work with the impact driver. I just picked up what I hope is old stock JIS Vessel, for a "yankee" right angle bit ratchet, and a handle with 4 reversible JIS bits. Much of what appears to be the "old" JIS is going out of stock.
  7. Don't know if this has ever been posted, but I ran into it while browsing RoadRunner's Bucket List Roads. A map and Garmin for Southern Ohio motorcycle roads of interest from AthensOhio Windy9 website: http://athensohio.com/category/where-to-play/ohios-windy-9/
  8. lol, 555 isn't historically a road, it's the descendant of a wagon trail built of logs that ran from Zanesville to the Ohio River. Speed limit was probably single digit. I still like it, but don't believe any of the signage that's there. Multiple signs in a turn means "everyone wrecks here anyway" and is not likely a normal turn in a road. Think horses and wagons... I was also impressed by some of the blind turns in the road where you couldn't see it, after topping over a rise you didn't know was there. One in particular (North-bound) would have launched from the peak in the road and over the top of a house trailer and off down into a meadow valley.
  9. lol, there's still 4k left in those...
  10. lol, some cheap mask reduces virus by 65%. Yes, if you get the right one, that's possible. Unfortunately there is a wide variety, from an even wider number of producers, mostly foreign sourced, and they mostly all look the same. For a while 50% to 100% of any mask sold were rejected when tested for government purchases. The actual effectiveness can range from 0-5% up to a rare maximum of 65%. So true, but it's a gamble. As well as the price has been jacked up 5 to 10 times what they used to sell for, which is annoying.
  11. ha, I'm old enough to remember a national outcry against Randy Newman's song "Short People". For a month or two everything "short" was verboten, per the thought police. People got over it, and went back to normal (whatever normal is). Whatever is going on now will pass too. But it's going to leave a bad taste for quite a while. Wondering if 2020 is going to be a "never forget" moment in time. Regardless, try not to buy into the media's "fear and loathing". Stick to reality, which is what you see around you.
  12. Italy might not make bikes in Japan, but Japan makes bikes in Italy for the Euro market.
  13. G4 EA H1N1 - G4 for short - Chinese Pig Flu - Fauci says it has elements of Swine Flu 2009 and Spanish Flu 1918. It's currently of concern in China. Just what we need, another pandemic for late this year and next. Before we even get rid of the one we've got. Food supply isn't fully recovered yet. Potential to get worse. I'm going to slowly start stockpiling more canned food and other long shelf life staples. I'm getting tired of this...
  14. yes, or if they aren't, they will be soon.
  15. I've used this and other solder devices. But not on something that moves and vibrates. Aerospace crimps everything, using no solder on connectors and connections. Only on circuit boards. Vibration and motion cracks solder used on connectors and it fails. Lesson learned in my early years, wire nuts do not work on cars, they just vibrate and fall off.
  16. NADA lists prices. Back to 1959. And value probably varies in different parts of the country. https://www.nadaguides.com/Motorcycles/Manufacturers Honda used to stock parts for every bike they ever made. They no longer do that. I keep looking at vintage, but not doing anything about it.
  17. CDC just said in their week 17 update, that COVID is no worse than a bad flu year, for the over 65 age group. Less for all others. That's for the entire country, including the epidemic centers like New York. So it's two thirds less than a regular flu, for the entire country, outside of the New York area, which has more than 60% of all cases so far. I'm not sure we could have done this better, but I think we should have done this better. Too much damage was done.
  18. Only see one so far, Bud's Gun Shop mail order. https://www.budsgunshop.com/product_info.php/products_id/411559293 I never found any more 00 or 000, I picked up a big box of Fiocci LE #4 instead.
  19. Bought shelf stable milk. A bunch. Won't last forever, but will last a long time warm and longer cold. Find it in the coffee/tea isle with the powdered milk. And powdered milk lasts a very long time. Also picked up dehydrated eggs. Those will be an experimental learning experience, to use it in cooking. Like baking bread. Things are happening slower or later here. A trip to the local grocery yesterday in the pouring rain, I found most stuff in stock with purchase limits, but no canned vegetables, canned fruit, and all the bread was gone. Your results will vary, my area is basically small town /county / rural. Won't be going back till it's over.
  20. Not much, looking at suppliers for space launches, and military aerospace, specifically the unmanned wing man stuff. There's been some advancements in the military AI programming for unmanned aircraft. I'm just an aerospace nerd. I'm switching to a broker that invests quite well, and gonna forget about it. And he researches my recommendations and mostly agrees and buys in. He doesn't know much about space and military and aerospace stuff. edit: I need more silver... I just like to have it around.
  21. NASA is trying to invent a dual electrolyte fuel, that you can pump and go. Two fuels, two tanks, one is positive and one is negative. Plus two waste fuel tanks that you pump back at the fueling station to reclaim (recharge). These inventions don't always work out, but if it does, all the electric vehicles will be obsolete. Suddenly, just like that.
  22. Haven't tried it yet. I've noticed good performance from American Eagle. Which is Winchester made cheaper.
  23. When the brine or road salt is distributed on the road, just forget it till springtime after a couple of hard rains wash it away. That stuff gets in everywhere and everything on a bike. It's bad enough to want to get a beater bike for riding in the winter.
  24. I think bolt action is a good choice. Probably doesn't have to be new. My most accurate 22LR is an ancient Mossberg bolt action tube feed with an old 4x Weaver scope. It easily places all shots within the size of a quarter at 50 yards measured. (Prone w/bipod) Ammo selection is critical, find what works. For me, it's Winchester 22LR SuperX that works.
  25. The left and right combined are a minority compared to the independents. But the left and right has the money and power. Fix it.
×
×
  • Create New...