-
Posts
98 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Calendar
Everything posted by Siebec
-
A* S-MX Plus,size 45/10.5. Used these on the track, they have scuff marks but are in good condition. Haven't used them in years, they have just been sitting. $60 Knox Aegis back protector. 7 plate. I only used this a few times, it's in like new condition. Has been sitting, don't have a use for it anymore. $60. Located in Tiffin, Ohio. I am willing to travel a reasonable distance, but will to ship for actual shipping cost. Take both for $100.
-
Are these AA's or the Winchester promo loads? I'm in for 2k (possibly more) if they are AA's.
-
Depending on the type of loads I would be interested. I am looking for trap loads 7.5 or 8's either handicap loads 1235fps+ or 16's around 1145fps.
-
Same here, will be signing up tomorrow for Int.
-
http://www.opticsplanet.net/mueller-optics-4-5-14x40mm-ao-apv-rifle-scope.html Excellent scope for the money.
-
I'm signed up for both days, will be up there Friday evening.
-
Thank you everybody to put this on, it was a great time. I learned a lot and I'm glad I finally got my knee down!
-
Love this stuff....goes great on pretty much anything.
-
Looking into doing some track days this year and I would like to buy a 1pc suit. I figured I would ask here first to see if anyone had one for sale before I go out and buy a new one. I am 5'8" and about 185lbs. Thanks!
-
Low sided the bike this weekend and I am looking for a few parts. - Right side head light assembly (lens, backing etc..) - Right side headlight faring - Front faring stay - Right side Upper, mid and lower fairings - Right side mirror - in the middle of the bike under where the air intake is, there is a black plastic piece held in with plastic pop rivets, I need the middle piece. Looking for blue parts. Thanks!
-
Lost all of mine in a tragic boating accident.
-
I looks like the adjustment bolt is still there thankfully. There is quite a bit of vibration around 4k rpm however. I was hoping replacing that bolt would take care if it, but it does seem like a good time to check all the nuts to make sure they are still tight. Thank you everyone for the help, this is an awesome site!
-
Yeah ReconRat that makes sense now, I did not realize the adjust bolt came in through the back. It looks like there is just a nut on the out side. Thanks for the help.
-
Here is the best I can do with pictures for now.
-
I think I received or ordered the incorrect part. Does anyone happen to have a picture of what I am looking for?
-
I looked at the schematic a little closer and it seems like I need #29 and #30. Thanks for the site. I looked all over and didn't find anything like that.
-
Yeah that's the shaft I am talking about I just need to know what part goes on the end of it. It seems like it would be a hollow bolt that is threaded on the inside and the outside due to the fact that the frame is also threaded where the shaft comes through.
-
I am missing what looks to be like a rear engine mount bolt on my '04 R6. I can't tell exactly what kind of bolt I need. It's located diagonal from the oil dipstick downward. I wanted to make sure I am getting the correct type of bolt from the dealership before I spend money on it because I seems expensive. There is a shaft in the middle through the engine and frame the end is threaded and the inside part of the frame is also threaded. I am looking for what ever threads into the frame and on the end of the shaft at the same time. I don't currently have a camera but I may be able to get one if a pic is needed to better explain.