Jump to content

Bike plans during the hibernation?


Scruit
 Share

Recommended Posts

Once the weather gets cold enough that riding to work is the exception rather than the rule, I have some plans for for on the bike.

 

- Switching to a 14t countersprocket.  Almost all my riding is done on country roads where I don't get over... 55mph...  Sure, let's go with that...   The extra acceleration will help out. 

- Replacing the speedo background with a better calibrated background so that the speedo is accurate.  It reads 8% high across the board for me and I'm sick of having to do the match in my head to figure out how fast I'm actually going.

- Checking the air filter and replacing the coolant requires the tank to come off.  While Its off I'll be cleaning up some additional wiring that I added for aftermarket goodies like the dashcam and GPS tracker. 

- Wiring up the crash sensor SOS and remote engine kill features of the GPS tracker.

- My aftermarket horns didn't last - I'm going to remove them and the associated wiring, going back to stock.  I'm looking for a *RELIABLE* loud horn that is bike specific and doesn't sound like dog's squeaky toy.

 

 

Who else has plans for this winter?

Link to comment
Share on other sites

 

- Replacing the speedo background with a better calibrated background so that the speedo is accurate.  It reads 8% high across the board for me and I'm sick of having to do the match in my head to figure out how fast I'm actually going.

 

 

Anyone know why many bike speedos are so inaccurate?  It has to be intentional, but why?

 

The worst I've had was off by 10%.  My VFR otoh is spot on.  

Link to comment
Share on other sites

Anyone know why many bike speedos are so inaccurate?  It has to be intentional, but why?

 

The worst I've had was off by 10%.  My VFR otoh is spot on.  

 

Many countries have laws that say a speedo cannot be inaccurate unless they read high side....so the manufacturers intentionally make them read high so they don't get dinged.  Thanks Obama.

  • Downvote 1
Link to comment
Share on other sites

Many countries have laws that say a speedo cannot be inaccurate unless they read high side....so the manufacturers intentionally make them read high so they don't get dinged. Thanks Obama.

Put a 190-55 tire on mine and it balls on now.

Anyone know why many bike speedos are so inaccurate? It has to be intentional, but why?

The worst I've had was off by 10%. My VFR otoh is spot on.

Link to comment
Share on other sites

Legalities aside, a speedometer that reads high makes the rider think that the bike is faster than it really is. I would think that this is a good thing from a marketing perspective. It is interesting how tires effect speedo readings. Changing from a 50 to a 55 series rear tire gave me a 3% speedo correction but I lost 1.5% when the tire went from new to old. Also, speedo readings are way high when cornering due to the fact that the effective tire diameter decreases by several inches when leaned over.

My winter plans are to do the 32,000 mile valve check & refresh the suspension on my cbr. Otherwise it's oil changes, stabil, & battery tenders.

Link to comment
Share on other sites

My current bike is new, so it will just be plugged into the tender and ready to go at a moments notice anytime the weather breaks. I have a waterproof outlet to wire up and may do heated grips at the same time, other than that I think I am good for now. :)

Edited by Pokey
Link to comment
Share on other sites

I plan to clean my big Ninja to prep for sale/trade and get my new BMW ordered.

Both supermotos will just get hooked to the battery tenders.

Not sure what the wife has planned for her little Ninja

Link to comment
Share on other sites

Suspension upgrades front and rear, valves check/adjust, sync throttle bodies, finally gonna do new clutch, new chain, air filter, general cleaning detailing.

Several things to do on the old kz440, lots of time and money to be spent this winter wrenching, fun stuff!

Link to comment
Share on other sites

Figure out where the hell I'm going to store the bikes for the winter.

 

Work on assembling trailer for track-bike usage (add wood bedding, tool box, wheel chock, etc). Fix electric on trailer that was destroyed by a certain relative that I let borrow it. 

 

Hook the SV up to tender. Put cover on it. Work on selling it in spring. 

 

Hook Triumph up to tender, order new stator cover and install. Look at it because it's pretty and orange. Shed a single tear because we'll be apart for so long. 

 

 

May be out and about a little bit before I store though, depends on weather late this month. Wouldn't mind one last ride but I'm not thrilled about the prospect of coming around a blind corner to find 1,000,000 leaves blown into the road by Joe Countryside Jr. 

Edited by what
Link to comment
Share on other sites

Going to flash my ecu on my new r1. Removing the noise restrictions frees up 12-15hp on average on this bike. Should put it in the mid 170's or low 180's. Thats what most guys are getting with just a flash stock exhaust and stock map.

Gat daym that's some power. To think I have so much fun with my 70 some.
Link to comment
Share on other sites

Many countries have laws that say a speedo cannot be inaccurate unless they read high side....so the manufacturers intentionally make them read high so they don't get dinged.  Thanks Obama.

Then you get the "do-gooders" driving their indicated speed limit in the fast lane (to keep everyone else from speeding) that are really going 10 under.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...