Jump to content

repair work around dayton


tnugent1986
 Share

Recommended Posts

I'm looking for a place that does good work and doesn't charge an arm and a leg. I am going to need a checkup, new fluids, new chain, new shifter, fix an exhaust leak and cosmetics. My bike got hit in a parkinglot on a hit and run. It starts and I rode it to a friends house (slowly) but it definitely needs work done on it before I attempt to ride it again. I haven't touched it, other than to start it in 8 months.

Link to comment
Share on other sites

Apex Cycle and Salvage just south of dayton in springboro does repair work. 

 

message me here

 

give us a call 937-550-9151

 

facebook us: http://www.facebook.com/apexcycleandsalvage

 

we give ohiorider discounts.

+1 for Aaron - I've recommended him a few times to other SW Ohio folks needing moto love

Link to comment
Share on other sites

I'm looking for a place that does good work and doesn't charge an arm and a leg. I am going to need a checkup, new fluids, new chain, new shifter, fix an exhaust leak and cosmetics. My bike got hit in a parkinglot on a hit and run. It starts and I rode it to a friends house (slowly) but it definitely needs work done on it before I attempt to ride it again. I haven't touched it, other than to start it in 8 months.

Dont I know you Tom? :D Pretty sure we've met - bought a set of frame sliders from ya right?

Link to comment
Share on other sites

Apex Cycle and Salvage just south of dayton in springboro does repair work. 

 

message me here

 

give us a call 937-550-9151

 

facebook us: http://www.facebook.com/apexcycleandsalvage

 

we give ohiorider discounts.

Aaron, 

I live within walking distance of your shop, and had nooooo idea you guys were there until last week.  I was in Scotty's barber shop, flipping through one of those local advertiser flyers, and saw your ad.  He's a rider as well, so asked him what he knew about your shop.  Said he'd never heard of it, either.   We tried to figure out roughly where the shop was based on the address and kind of figured it was somewhere near the furniture store/ Tire Discounters.   

Good to see you on here.   May see you in the shop sometime.  

Link to comment
Share on other sites

We're across 73 from the furniture store/tire discounters plaza. We're on the backside of the large shopping mall that the whiskey barrel is in.

We're trying to expand to the front side of the building, for obvious reasons, and are currently negotiating lease agreements.

Thanks for all the kind words! We're very excited to be here and look forward to many years of service! We work on everything, and pride ourselves on our engine and suspension builds.

Stop on by or give us a call! Official hours are M-F 10-6, but more often than not, we're there early, late, and weekends.

Link to comment
Share on other sites

Dont I know you Tom? :D Pretty sure we've met - bought a set of frame sliders from ya right?

Yup, I haven't been on here in a long time. I don't have the email for my old account anymore, so I just made a new one.

My bikes sitting down at their shop right now.

Edited by tnugent1986
Link to comment
Share on other sites

Yup, I haven't been on here in a long time. I don't have the email for my old account anymore, so I just made a new one.

My bikes sitting down at their shop right now.

Welcome back man. It will surely feel good to get back out 2 wheels for ya

Link to comment
Share on other sites

Welcome back man. It will surely feel good to get back out 2 wheels for ya

ya, I can't wait. I only got out a few times last year because I got a slow start on the season, then that happened. I plan on doing alot of riding this year, if nothing else atleast back and forth to work which will be a good 100 miles a day :-) Edited by tnugent1986
Link to comment
Share on other sites

Can you mount tires on polished rims with out scratching?

I gotta come out and take a look........

Sorry we missed you this evening, but yes we can handle mounting tires on polished rims, unless they're very large sizes (26" fronts and 300mm rears).

Message me here anytime with your specifics and I can get you a proper quote. Thanks for thinking of us!

Link to comment
Share on other sites

I'm needing a tiny bit of repair work myself. I'll give you Apex guys a call this morning and came by just to visit and see what you guys do. Plus it's gonna be too nice today not to ride.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...